Produits

The CNC Insulators Processing Center is mainly used to process large insulation parts such as end rings, padding blocks and wire clamps in the transformer industry. By setting the program, it is possible to mill a pattern of any given shape on laminated wood or laminated paperboard; it can also process circular arc grooves and linear grooves on the end ring, and can also perform drilling and partial plane machining.

By setting up the program, the graph of any given shape can be cut out on laminated wood or laminated cardboard.It can also process the circular groove and linear groove on the end ring, drill hole and local plane machining.The special requirements of transformer insulation industry should be fully considered in the design and manufacture of this equipment, and special protection should be made in dedusting and preventing metal pollution.
Model JYCNC2544 Main technical parameters:
1. Working stroke: 2500×4400x260mm
2. Maximum thickness of milling cutter: 120mm
3. Repeated positioning accuracy: ±0.2mm
4. System resolution: ±0.025mm
5. Empty running speed: 25m/min
6. Maximum processing speed: 12m/min
7. Feed height: 220mm
8. Working voltage: AC380V/50Hz
9. Running instruction: HPGL G code