Produits

The Vertical Bevel End Ring Cutting Machine is mainly used for cutting and grooving of end ring from paper tube. Using numerical control, as long as the input process, automatically cut the end ring according to the set route out from paper tube as per required diagonal, and according to the needs of the end ring , it can cut slot on lengthwise.
Main features of our veritcal bevel
end ring cutting machine

：
1. CNC structure, easy to operate, high automation. Only need to input the program according to the requirements of the drawing, the entire cutting process of the inclined end ring is automatically completed.
2. Cutting surface quality is high, smooth transition, reduce grinding time.
3. Use forming milling cutter is used to cut once, with a dust removal port. Low noise and less dust.
4, Use of six claws automatic positioning, end ring paper tube clamping convenient, reliable positioning.
5, Manual replacement of the special chamfering tool can achieve automatic chamfering of the outer processing surface of the paper tube.
6, With the function of longitudinal cutting opening.
7, The device reserves the interface of the dust removal hose with a diameter of 100mm.
8, All contact surfaces with the end ring shall be isolated with insulating materials and shall not pollute the paper tube

Main Technical Parameter
：
End ring diameter range: 500mm~2000mm.
Maximum end ring height: 500mm.
Paper tube thickness 6~30mm.
End ring rotation speed: 1~5 m /min.
Maximum load bearing table: 800kg.
Milling power: 3kw, maximum speed 18000rpm.
Total power of the system: no more than 7kw.
Power supply 380V 50Hz